Water Service Planning FAQ

WaterService Planning FAQ

If you have any questions not answered below, please contact Burbank Water and Power (BWP) Water Service Planning at [email protected].

The building division handles permits. Please contact [email protected] or call (818) 238-5220.

There will be separate charges for the building permit fees and BWP fees. There is a Plan Check Fee; BWP charges Aid-in Construction (AIC) and Capacity Charges as described in the rules and regulations and the citywide fee schedule. Both charges vary by the type of work and size of the water service. AIC for a typical meter upgrade from 5/8” x ¾” to ¾” x ¾” upgrade is around $500. A service upgrade typically ranges between $7,000 and $18,000 depending on if a “Water Main Replacement Fees” is required. Other fees may be applicable, please review BWP The Rules and Regulations or you may request help at [email protected].
Between 3 to 5 business days after making payment

Typically, between 4-6 weeks

Typically, 2 to 4 hours

Building Supply Line is on customer property, begins at outlet side of the water meter and connects to the front of the dwelling before entering the building.

Your contracted plumber.
Once you have received a Cost Estimate Letter, you can visit the cashier at the BWP lobby at 164 W. Magnolia Blvd., Burbank, CA 91502, to make the payment. Payments are by cash or check only. You may also mail a check payment or drop it in a BWP collection box, and you must include the Cost Estimate Letter along with your payment.

Drop Box locations are available at https://my.burbankwaterandpower.com/portal/PaymentLocationPreLogin.aspx. 

Mail payments along with the Cost Estimate Letter:
Attn: Water Service Planning
164 W. Magnolia Blvd.
PO Box 631 Burbank, CA 91502
 
Once all fees are paid you must reach out to Cross Connection Control Specialist at [email protected] to verify all backflow requirements have been met.
If the property has more than one water service you are likely to need a backflow device. You may request help at [email protected] if you have any questions.
The planner who Planned checked your permit added the BSL size on the “Condition of Approval “comments when approving permit (ProjectDox).

Typically, when a service upgrade is required or when there is more than one water service on the property.